Aerospace Improving PCB Masking Process

A case study on improving the PCB masking process for an aerospace and defense manufacturer. 

Challenge

A manufacturer specializing in PCBs for aerospace and defense applications wanted to improve its process efficiencies by increasing throughput with the automation capabilities of a masking process.

The customer's original process involved masking military-grade PCBs in preparation for coating with a solvated conformal coating. Each board contained 28 plated mounting holes, 33 flush test points, and 8 through-hole connectors prior to coating. The customer's application time was 19 minutes per board followed by racking the boards for air drying of the maskant. With five people, they were only able to process 22 PCBs per person, per day for a total of 110 PCBs.

Solution

The Dymax team recommended a SpeedMask® light-curable masking solution with automated dispense and cure options.

The Dymax Team Territory Manager and Sales Partner met with the customer to review their process and understand their needs. The Dymax team looked at a UV solution with automated dispense and cure options as an alternative. They proposed Dymax SpeedMask 9-20479-B-REV-A and PVA Delta 8 Dispense Robot with FC100 dispense valve supported with Dymax UVCS 2.0 Conveyor with Fusion F300 UV curing lamps.

Results

The customer saw a daily process savings of 32 hours, freeing up four operators for other processes. 

By switching to SpeedMask 9-20479-B-REV-A and the implementation of an automated process, the customer was able to cut the processing time from 19 minutes to apply only the maskant to five minutes to dispense and cure. Altogether, Dymax helped the customer increase production output from 22 boards per person to 96 boards per operator and a 14-minute reduction in the process. The customer achieved daily process savings of 32 hours while freeing up four operators for other processes.

More Case Studies

We offer more than products, we offer solutions. See how Dymax is helping customers solve their most challenging applications in various markets.

View all

Adhesive Replaces 2-Part Epoxy for Faster Optical Sensor Assembly

A case study about how a light-curable adhesive replaced a two-part epoxy for faster sensor assembly and improved the application process. ...

Aerospace Improving PCB Conformal Coating Process

 A case study on improving the PCB conformal coating process by increasing production output.  ...

Aerospace Masking Process for Electroless Nickel Plating

A case study on the masking process for electroless nickel plating ...

Aerospace Printed Circuit Board Assembly

Increasing Production and Reducing Processing Time in PCB Assembly  ...

Automated Masking System Revolutionizes Surface Treatment Processing

A case study about how an automated masking line drastically reduced the processing times required for an aero engine component. ...

Bonding MLAs in Automotive Headlights

Adhesive for Bonding MLAs in Automotive Headlights Exhibits Low Discoloration Under High Temperatures ...

Cinch Gaming Controllers Get Enhanced Grip

Cinch Gaming, a national leader in custom professional video game controllers, was looking for a durable solution to provide a rubber grip coating to their ABS plastic controller shells. ...

Electrical Explosion Protection & Sensor Technology

A world leader in electrical explosion protection and sensor technology was looking to turn away from laser welding for an application that requires sealing two polycarbonates of their photoelectric ...

GenZe Electric Transportation Battery Pack Gasket

Using a form-in-place gasket to create a reliable battery assembly that meets strict design standards of weight, performance, and safety.  ...

High Performance Solutions for EV Charging Stations

A case study on how light-curable conformal coatings and encapsulants helped improve EV smart charging station infrastructure PCB applications. ...

Light-Curing Conveyor Enables 100% Manufacturing Scale Up

A case study on how using Dymax UVCS Light-Curing Conveyor Systems helped to increase the production of nasal swabs.VIDEO:  Dymax Partners with 3D Printer Company on COVID-19 Test Swabs #InThisTogeth...

One Part, Optical Epoxy Using UV/Visible Light and Heat Cure

A case study on using ultraviolet and heat cure to secure a camera module holder to a PCB. ...

Ruggedizing Lens and Reflector Housings in Flashlights

A leading manufacturer of premium portable lighting wanted to ruggedize its safety flashlights used in the field by firefighters, police officers, and military troops. In their search for a fast-curi...

Ultra-Red Fluorescing Technology Provides Immediate Quality Check

A case study on how the use of patented Ultra-Red® fluorescing technology can aid in product verification. ...

Get In Touch

Interested in learning more or have questions? We want to hear from you.

Back to top